Introduction

Jlab Earbuds are one of the best high-quality headphones. Everybody loves their sound quality. But some JLab Earbud users have found a problem that one side does not work properly. Usually, it’s the left side of the earbuds that possesses the issue.

Multipoint connections and noise cancellation are some of the main features that have been favorites among JLab JBuds Air ANC earbuds. Keep in mind that there is no electronic device that does not have issues. They come with their flaws. Some have less, and some have more. Let`s dive in to learn more about the issues of Jlab buds and how to resolve them.

A couple of recurring problems with JLAB Earbuds are:

How to Fix JLab Left or Right Earbud Not Working Properly?

Here is the summary of the effective and short ways to fix the JLab Earbuds:

Now let`s check out the solutions in detail:

Reset the JLab Earbuds

Resetting the Jlab earbuds has a track record of solving several problems that may be known or unforeseen. The procedure may vary from earbud to earbud available in the market. How resetting the JLab buds is quite simple, such as:

Epic Air Models

JLab Go Air

Jbuds Air Models

Disconnect and Reconnect the JLab Earbuds

As mentioned earlier, the pairing process might be run incorrectly, resulting in disconnection. All you have to do is go to the Bluetooth–connected devices list and tap on forget at the Name of your earbuds.

Place your earbuds into pairing mode to reconnect, and by now, the problem must have been resolved.

Follow these steps to pair JBuds Air Icon, JLab Go Air, Go Air Pop, Go Air Sport, Go Air Tones, JBuds Air ANC, and JBuds Air V3-V2-V1:

After this exercise, check if no other device is trying to develop a connection with your JLab Earbuds.

This is one of the most widely known problems in wireless earbuds and also wireless headphones. Even if you have turned off the Bluetooth of your device, there are chances that your earbuds are still trying to establish the connection.

To prevent this situation, you can carry out some steps, such as:

Ensure the Earbuds are Properly Placed in the Charging Case

This is among the widely known issue that earbud users do not place the earbuds into the case properly. This could cause the earbuds to not connect properly with one another.

Don’t be hasty to place the earbuds in the case. A pairing issue is imminent if any of them is clicked properly to the base. In this scenario, your earbuds will also not be charged correctly. Earbuds are quite delicate electronic machines and must be handled with extreme care. They also have a tiny battery and need to be recharged frequently. So, take good care of your earbuds to enjoy your favorite music.

Make Sure Earbuds are Properly Powered on

As simple as it may sound but in fact, many people forget to power on both earbuds. One of the earbuds may be off, and the JLab earbud turns off after 3 minutes of inactivity. All you have to do is follow these simplest steps to switch on the earbuds:

Check the Battery Status of Both Earbuds

This is something that many earbud users commit most of the time. For some reason, the users do not charge the earbuds well. One of the earbuds or both are depleted, and you might face connecting or properly using the earbuds. Ensure that charging pins are cleared of any debris or dust hindering the charging process.

You must also check the charging cable and charging port to see if both are capable of providing sufficient juice to your earbuds. Follow these steps to check the battery status of JLab earbuds through the phone and also directly:

Check Battery Status Without a smartphone

Drain the Battery of the Earbuds and then Recharge

If the earbuds are not working properly, then completely discharge them and fully recharge them completely. You should place the earbuds into the charging case and leave them there for a good amount of time for a complete charge. Once charged, try reconnecting with your device.

Clean the JLAB Earbuds

JLAB earbuds or earbuds of any other company are quite delicate and sensitive to debris or dust. So, keep in a clean environment, and don’t forget to keep your ears clean as well. We also recommend not sharing earbuds as sensitive ear infections might be exchanged with your peers.

Here are the steps to clean the JLAB Earbuds:

Remember to take care of your electronic accessories for the long life of the equipment.

Contact the JLAB Customer Support Center

If nothing works in the end, Qnnit recommends contacting the JLab customer support center to get the official response and tips for every possible fix for JLAB Buds. If your buds are still under warranty, ask for a refund, exchange, or free repair.

JLAB JBUDS FAQs

Here are the frequently asked questions about JLab Earbuds, One Side Not Working Every Possible Fix:

Q1: What is JLAB?

Ans. JLAB is a leading audio company based in America providing hi-tech wireless audio accessories.

Q2: Are JLAB Earbuds of good quality earbuds?

Ans. Yes, JLAB JBUDS is ranked among high-quality earbuds.

Q3: How to Fix JLab Left or Right Earbud Not Working Properly?

Ans. Here is the summary of the effective and short ways to fix the JLab Earbuds:

Q4: Why does one earbud, not work and the other works?

Ans. There are several factors involved, such as:

Conclusion

Jlab Earbuds are good to enjoy some classy music. But you might have an idea that they are delicate and require specific care and attention. So, keep them charged and well-protected for their optimum function. We hope that you must have found the above steps quite useful in fixing the issues with JLAB earbuds.

For more information, keep visiting our page at Qnnit.com. We provide updated and solid information regarding games and tech. If you possess Airpods, you must also know how to charge AirPods Pro. Qnnit offers a seamless gaming experience with 700k+ monthly visitors and 10k+ hours of gameplay.