What Does MIP 67 Error Mean and How to Fix It?

Introduction

Mobile IP, also known as MIP, is a protocol that enables mobile devices to move from one network to another while maintaining their assigned IP address. MIP 67 is an error message often seen by users of Android devices, specifically those connected to certain networks like Sprint. This error generally means there is a problem with the device’s mobile data connection. Now, let’s dive into an in-depth exploration of MIP 67.

What is MIP 67 Error?

MIP Stands for Mobile Internet Protocol. As you can guess from the name, the MIP 67 error is related to the Internet problem. As a result, this error will not allow you to use and operate the Internet on your mobile and Boost Mobiles.

There are several reasons behind this error, but the major issue is that this error pop-up keeps popping up on your screen every 20-30 seconds and will not let you use your mobile device.

Furthermore, several Android users complained about this annoying error, but no official fix has been rolled out, so users still wonder how to fix it. There are also other errors like MIP:104 and MIP 003 that mean the same and are related to the internet problem.

What is the Function of MIP?

MIP is a communication protocol that maintains the same IP address when move or switch from one network to another work. So, it is accountable for painting permanent IP addresses across all the networks. Many error code names exist, like MIP 65, MIP 104, MIP 129, etc, related to various issues.

What Causes MIP 67 Error? (6 Reasons)

Below are the reasons that cause MIP Error:

1. Outdated device settings: If your device’s settings are not up-to-date, it can cause the MIP 67 error.
2. Incorrect Access Point Name (APN) settings: Incorrect APN settings can disrupt your device’s connection to the mobile network, causing the MIP 67 error.
3. Software glitches: Sometimes, software problems or bugs can cause issues with the network connection, resulting in the MIP 67 error.
4. Hardware problems: While less common, hardware issues with the device can also cause the MIP 67 error.
5. Misconfigurations in network settings: If the network settings on your device are misconfigured, it can lead to network connection issues like the MIP 67 error.
6. Outdated Preferred Roaming List (PRL): If your device’s PRL is outdated, it might not connect properly with the network, leading to the MIP 67 error.

How to Fix MIP 67 Errors? (8 Easy Fixes)

If you are facing MIP 67 errors, here are 8 ways to Fix MIP 67 Errors:

Fix 1: Turn Off Mobile Data and On again

Turning off the mobile data will stop the pop-up since your device will not check for cellular services, but the point here is to fix the issue, not just avoid the pop-up.

So, once you turn off your mobile data, turn it on after a few seconds. However, if it does not work, you better remove and reinsert the SIM card.

Fix 2: Restarting Your Device

If the MIP 67 error still exists even after turning the mobile data on and off, you may try restarting the devices. The MIP: 67 error message might take place due to the following reasons:

1. Resource overload when the cache files fill up or are corrupted
2. Internal connection issues

Below are the steps to restart your device:

Step 1: Make sure to press and hold the power button on your device.

Step 2: Choose ‘Restart’ or ‘Power off’ from the menu that appears.

Step 3: If you choose ‘Power off’, wait for the device to turn off completely, then press and hold the power button again to turn it back on.

Fix 3: Change APN Settings of the Device

Changing APN setting of the device is one of better option to resolve the error. As the MIP 67 error is related to the network connection, changing and updating the APN to its latest settings can be beneficial. It might sort out the MIP 67 error issue from popping now and connecting your device to the Internet.

Below are the steps to change APN settings of the device:

Step 1: Go to your device’s ‘Settings’

Step 2: Now, go to ‘Network & Internet’

Step 3: Next, click ‘Mobile Network’, then ‘Advanced’

Step 4: Choose ‘Access Point Names (APN)

Step 5: Make sure to change the APN settings to the ones provided by your carrier or reset them to default.

Step 6: Restart your device to apply the changes.

Fix 4: Remove the SIM Card and Reinsert it

Removing or inserting the battery is the other better way to sort out the MIP 67 error. However, most smartphones have built-in batteries, which everyone can not easily remove.

The alternative way would be to remove and reinsert the SIM card. When SIM is inserted again and a SIM is recognized, a new connection will be made, which could terminate the error.

Below are the steps to remove and reinsert SIM Card:

Step 1: In order to remove and reinsert SIM Card, power off your device

Step 2: Now, use a SIM card removal tool in order to eject the SIM card tray from your device

Step 4: Next, just remove the SIM card from your device

Step 4: Lastly, insert the SIM card tray back into your device and power it on

Fix 5: Change the Mobile Station ID

It is worth mentioning that mistyping the mobile station ID (MSID) number or the carrier network’s mobile identification number (MIN) leads to connectivity issues and causes MIP 67 pop-up. So, to stop the MIP: 67 error, you must check the MIN and MSID numbers and re-type them again.

It is vital to mention that changing your MSID should be done under the direction of your carrier’s customer support, as incorrect settings could badly impact your ability to connect to the network. Below are the steps to change MSID:

Step 1: First, go to your device’s ‘Settings’

Step 2: Now, click on ‘Network & Internet’

Step 3: Next, choose ‘Mobile Network’, then ‘Advanced’

Step 4: Look for an option to change your MSID. If you can not find this option, contact your carrier’s customer support for assistance.

Remember: always double-check any changes to your MSID with your service provider to avoid any unintended issues.

Fix 6: Change Network Mode

Changing Network Mode is yet another effective way to get out of this problem. Network mode will be automatically set depending on the connection. You can also change it manually. Below are the steps to change network mode:

Step 1: First, go to your device’s Settings

Step 2: Next, go to Connections

Step 3: Now, click on Mobile Network

Step 4: Next, click on Network Mode

Step 5: Change your network mode and then restart your device, and check if the error persists

Fix 7: Contact Customer Care

If, after trying the above ways, the MIP 67 error still exists, you better contact customer care, and the good thing is that most customer care contacts are free, and you will be charged nothing call.

By contacting customer care, you will be able to know whether there is an error in the carrier network or not. They might give a solution to the problems or even can send you new APN settings.

Fix 8: Wait for Some Time

Sometimes the error caused due to connection problems, or the network could be busy or have glitches. If the above solutions do not work properly, it is better to wait sometime and again to try those methods as sometimes the error disappears itself.

Fix 9: Visit the Device Service Center

Lastly, the ideal action to sort out MIP 67 error is to visit the device center and present your problem. As it is, the center can solve all network issues, including mobile network state disconnected and those related to the device’s hardware, and your device will start working again and accessing mobile data without any issue.

Frequently Asked Questions

Below are the FAQs about MIP 67 Error:

Q1: How do I get rid of MIP 67?

Ans: You can get rid of MIP 67 error by changing network settings, updating your device, or contacting your service provider. See the above sections for a detailed guide.

Q2: How do I fix my Sprint MIP 67?

Ans: The steps are similar as those described above. Sprint users can also update their Preferred Roaming List (PRL) from their device settings.

Q3: What is MIP 104?

Ans: MIP 104 is another type of Mobile IP error. It also relates to issues with the device’s mobile data connection, but the specific cause might differ from that of MIP 67.

Q4: How do I update my Sprint PRL Android?

Ans: You can update the PRL on your Sprint Android device by going to Settings > System > System updates > Update PRL.

Q5: Does a factory reset fix MIP 67 error?

Ans: A factory reset can fix the MIP 67 error, but it should be used as a last resort as it erases all data on your device.

Q6: Can incorrect APN settings cause MIP 67 error?

Ans: Yes, incorrect APN settings can lead to MIP 67 error. Always make sure your APN settings match those provided by your carrier.

Q7: Can I still use WiFi if my device shows MIP 67 error?

Ans: Yes, the MIP 67 error specifically relates to mobile data. WiFi should still work normally.

Q8: Is MIP 67 error a hardware issue?

Ans: While it’s usually related to software or network settings, in rare cases, MIP 67 error could be due to a hardware problem.

Q9: What does MSID mean on my Android device?

Ans: MSID, or Mobile Station ID, is a unique identifier for your mobile device on the network. Changing this might resolve MIP 67 error.

Q10: Is MIP 67 error common on all networks?

Ans: No, MIP 67 error is most commonly seen on the Sprint network. However, it can occur on other networks as well.

Conclusion

MIP 67 error, while frustrating, is usually fixable with a few troubleshooting steps. From adjusting your network settings to updating your device’s software, there are multiple strategies to tackle this error. Remember, if all else fails, do not hesitate to reach out to your service provider for assistance.